0.8 mm pitch connector for pcb right-angle smt right-angle smt type female connector for pcb hdra-ed136lfzgt( )-( )+ mating connector : hdra series idc type male cable connector, or straddle smt type male connector ? configuration of product part no. hdra- ed 136 lfz g t ( )- ( )+ ?? ? ?? ? ? ? series name ? no. of contacts: 136 ? t ype of contact lfz: right-angle smt type, fem ale ? fo rm of shell blank: standard shell a: shell with flange for emi ? lock screws l: provided (panel thickness: t = 1.12 mm or less) ? ground lock pins with hold downs ? contact plating g: 0.76 m gold plate ansi/sff8441 ? contacts ? insulator a insulator b insulator c insulator d insulator e ? insulator f ? shell connection hardware a shell o lock screws ? hold downs 37.7 0.1 10.72 0.1 C0 2.4 0.08 5.84 0.05 34.7 0.1 pos.#68 3.925 cn1 pos.#2 pos.#1 ? ? 26.45 21.25 ? ? 42.7 43.37 37.7 31.65 28.3 0.833=26.4 32.35 41.9 3.46 34 35 1 68 34 68 1 35 12.7 2.85 1.4 12.84 4.5 5.84 recommended panel cut-out dimensions flange for emi C0 r HDRA-ED136LFZGTA+ ? o a (cn2) (cn2) pos.#68 (cn1) (cn2) pos.#2 (cn1) pos.#1 (cn1) ? 34 35 1 68 34 68 1 35 cn2 4.05 0.2 12.84 mounting method of right-angle smt type female connector for pcb C0.15 main body pcb smt type board connectors (hdra-ed136lfzgt( )-l+) (hdra-ed68fyg+) 29.5 4.6 0.7 0.7 0.8 4 4 0.8 0.833=26.4 hdra-ed68fyg+ ?.8 0.45 0.025 7.75 0.03 8.985 0.05 4.225 0.03 2.975 0.03 0.75 0.025 2.35 0.025 4.7 0.03 9.4 0.03 2.35 0.025 4.7 0.025 7.05 0.025 2.1125 0.05 5.825 0.05 1.3 0.03 6.425 0.03 0.8 0.03 pos.#1(cn2) pos.#2(cn2) pos.#68(cn2) pos.#68(cn1) pos.#1(cn1) pos.#2(cn1) 0.833=26.4 0.05 27.15 0.025 29.375 0.025 30.625 0.025 34.15 0.03 34.525 0.05 2-?.45 0.1 (pad) 2-?.95 0.15 10max. (p.t.h.) 2-?.75 0.1 C0 4-?.9 0.05 C0 C0 edge of pcb t aping packages are available for automatically mounting board connectors on a pcb. the product part number of the taping package is hdra-ed68fyg-tp2. one reel provides 1000 board connectors. (500 sets. tw o board connectors can be mounted at a time using a cap.) the reel diameter is 380 mm. the tape width is 56 mm. after board connectors are mounted on a pcb, mate them with the main body, and solder hold downs and ground lock pins. ? components : pad (four lock screws are supplied with a connector.) recommended pcb layout t=1.6mm select the connector according to panel thickness. for the application without panel, use washers or special lock screw (p/n: hdra- e68lfd-7c). others wire wrapping crimping soldering idc press-in smt through hole
|
